Variable rate irrigation (VRI) is increasingly common in field crops, but less so in orchards. That may begin to change with a message from the Almond Board of California: growers can boost profitability by adopting variable rate irrigation in conjunction with automation and farm data analytics tools.

“We’re [already] providing growers with tools to make decisions, [such as] imagery data," says Tom Devol, the board's senior manager of field outreach and education. "But they can’t truly leverage that decision if they irrigate everything the same way they used to. If they’re truly going to get [maximum] value out of a tool like an imagery platform or soil moisture monitoring products, they need to think about automation—and they likely need to think about designing their irrigation system to meet all the profiles of the orchard."

The how—and why—of VRI

A variable rate drip irrigation system allows growers to deliver different amounts of water to different areas of an irrigation plot as needed. Variable frequency drives (VFDs) installed at a pump let growers “throttle” how much water they send out to different orchard locations from that same pump, Devol explains.

Initially, the goal of variable rate systems was to tailor water delivery specifically to different soil structures across an orchard, Devol says. But he now sees wider potential for this type of irrigation strategy. “We at the Almond Board really envision taking variable rate irrigation to another sphere of designing around flexibility—not just for soil, but other reasons."

drip line almond tree

The initial stumbling block to variable rate irrigation in drip systems was the need for more valves than in a typical setup: more valves meant more labor to open and close them. Even today, Devol says, this constraint contributes to the fact that only a small percentage of almond growers use variable rate drip irrigation—and it's often those dealing with marginal soils or difficult terrain.

But Devol predicts that as automated systems become more available and more affordable, variable rate drip irrigation systems will increasingly prove to be the best choice even in orchards with good-quality, contiguous soils. As well as the infrastructure becoming more practical, rising labor costs, increasingly severe and frequent water shortages, and mounting regulatory pressure will likely make this type of precision strategy more necessary.

“The pressure of maximizing their water and their nutrients, any of their inputs, is never going to go away. That pressure is only going to increase in coming years,” Devol says. 

Pairing VRI with farm data 

As automation becomes more widely available, Devol is strongly advising growers putting in a new almond orchard to consider installing a grid-based variable rate system for maximum flexibility. A typical design might be 50 valves in a 100-acre plot.

This approach opens up an array of options for responding quickly to changing conditions, Devol says. For example, when frost threatens, a grower with limited water can prioritize delivery to low-lying areas where damage is most likely. If tree growth and vigor change as a new orchard matures, an irrigation block set up on a grid pattern can be easily adjusted to meet trees' needs.

Automated VRI setups also put growers in a better position to take advantage of insights gained from farm data—for example, from moisture probes or aerial imagery.

PLI_hoirzontal

Water stress data from Ceres Imaging shows how trees' needs can vary significantly across an orchard.

“So you used to irrigate everything for eight hours every three days," Devol says, as an example. "But your imagery data shows that this section only needs six and a half hours, this one needs eight and a quarter, and this one needs eight hours and 30 minutes. But can field labor execute on that? No, it doesn’t work that way."

But with an automated variable rate system, the grower can easily make the recommended adjustments to optimize performance, without adding to the labor bill.

The bottom line, Devol says, is that taking advantage of evolving irrigation technology and making changes based on data helps growers conserve resources, save on labor and inputs, and ultimately become more profitable in an increasingly difficult growing environment.

“The way that grandad used to do it? We’re past that. We have to maximize the yield produced on every acre of ground. We are in a situation of such water scarcity that we can no longer have under-performing acreage. That acreage has to perform well. These tools help us do that.”

Industry trends Irrigation Almonds Orchards

Back to blog

The difference between Ceres Imaging and other technologies I've used is the help I get from their expert team.
Jake Samuel, Partner
Samuel Farms
With Ceres Imaging we can take a more targeted approach to applying fertilizer and nutrients.
Brian Fiscalini, Owner
Fiscalini Cheese Company
These flights can cover way more ground and provide more insight than a dozen soil moisture probes — and it's cheaper to implement.
Patrick Pinkard, Assistant Manager
Terranova Ranch
The average Ceres Imaging conductance measurement from its imagery over the season has provided the best correlation with applied water.
Blake Sanden
University of California Cooperative Extension